Nytech Heating, Cooling, and Plumbing has certified technicians to take care of your Furnace installation near Parker CO.
 

Installing Insulation on Electric Hot Water Heater

Nytech Heating, Cooling, and Plumbing has certified technicians to take care of your Furnace installation near Parker CO.
Schedule Service

Installing Insulation on Electric Hot Water Heater

Installing an Insulation Blanket on an Electric Water Heater

Note: Installation is more difficult on gas and oil-fired heaters. Ask a qualified HVAC contractor for instructions.

  1. Cut the tank top insulation to fit around the piping at the top of the tank. Tape the cut section closed after the top has been installed.
  2. Fold the corners of the tank top insulation down and tape to the sides of the tank.
  3. Position the insulating blanket around the circumference of the tank. For ease of installation, position the blanket so that the ends do not come together over the access panels in the side of the tank. Some tanks have only one access panel.
  4. Secure the blanket in place with the belts provided. Position the belts so they do not go over the access panels. Belts should fit snugly over the blanket but not compress it more than 15% to 20% of its thickness. The installation is easier with two people. If working alone, use tape to hold the blanket to the top until you get the belts into position.
  5. If your water heater has the temperature/pressure relief valve and the overflow pipe on the side of the tank instead of on the top, install the blanket so these items are outside of the blanket. Depending on the piping arrangement and location, you may need to compress, or even cut, the blanket.
  6. Locate the four corners of the access panel(s). Make an x-shaped cut in the insulating blanket from corner to corner of each access panel.
  7. Fold the triangular flaps produced by the cuts underneath the insulating blanket. Repeat steps 6 and 7 for the rating/instruction plate.
  8. The blanket must not be installed on a leaking tank.

Content (c) Online Access, Inc.
© Online-Access
Get In Touch
 
Address:   970 Park St
Castle Rock, CO 80109
Phone:   303-663-6840
Plumbing Lic# 0003732
Schedule a Heater repair service in Castle Rock CO
Connect With Us
 

Office Hours:
Monday-Friday: 7:00am - 6:00pm
Saturday-Sunday: 8:00am - 4:30pm

Service Hours:
24/7 Emergency Service Available

Plumbing Lic# 0003732
Schedule a Heater repair service in Castle Rock CO
Payment Options
 
For Furnace repair service in Castle Rock CO, we accept most major credit cards.
 
We accept cash for Heating repair service provided in Larkspur CO.
We accept check for Furnace repair service provided in Parker CO.
 
Allow Nytech Heating, Cooling, and Plumbing to repair your Heater in Larkspur CO
Home   |   Email Us   |   Schedule Service   |   Get a Quote   |   Maintenance   |   Employment   | Financing   |   Search Site